Upload Design (Fabric)

Back
  • Artwork Preparation Tips
  • Files must be submitted with proper orientation to ensure proper back up.
  • It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  • Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  • All type must be outlined (not embedded). No linked images.
  • If file contains a die-line, it must be a separate spot color called 100% CutContour and be on its own layer. (100% Magenta Color)
  • The die-line shape must be a single path stroked.
  • Please provide vector only artwork for type, logos, shapes and all other artwork.
  • If you select a White Ink option with your order, please supply a single file that includes CMYK (if necessary) and a spot color called exactly 100%Spot 1. Do not supply separate files for CMYK and White Ink.
  • File should be CMYK only (no RGB) with a Die-line and/or White Ink 100%Spot 1 depending on your order specifications.
Ready to create your product design?
To start, select the product size, preview the design guidelines, download the guidelines for reference, and proceed with the customization options.
 
 
x
 
 
Help template cannot be generated as one or both bleed sizes (height and width) are set to 0.
Bleed Line
Safe Line
*
 
Please enter valid input
*
 
Please enter valid input
Supported Format Supported Format
Back to Standard UploadClick here to upload large files
*
*
Front Page
Click to upload or drag and drop

Processing...